JAMES DULLEY | Cutting your utility bills CO detectors for the home provide cheap protection

Q. We have a newer home with a gas furnace, water heater and range. A nearby family was almost killed from carbon monoxide (CO) poisoning. Are we at risk with new appliances? Are home CO detectors available?
A. Although the chances of experiencing a problem with CO poisoning are not great with newer gas heating appliances, there certainly still is a risk. A flue can get clogged by an animal or debris or the appliance many just malfunction. Definitely install several home-type CO detector/alarms.
Your gas range is much less likely to create CO gas because it uses an open flame with plenty of oxygen available. Never use a gas range or oven to help heat your home though, even during an emergency. In a newer airtight home, the flame can lower oxygen levels in the air and then CO gas can begin to form.
CO gas is a "silent" killer (odorless, tasteless) that often occurs at night while people sleep. Its symptoms at low concentrations (headache, watery eyes, nausea, sleepiness, etc.) mimic the common cold or the flu.
Without a CO detector, your family may be slowly getting poisoned at home.
There are many designs of CO detectors available for home use. Some are battery-operated, some are plugged into an electrical wall outlet and others are simple tablets that change color in the presence of CO gas.
Some full-featured CO detectors start at only $25, so they are cheap protection.
Importance of location
It is a good idea to locate a CO detector in several areas of your house because each detector is typically only effective for the room where it is located. As a minimum, put one in the master bedroom so the parents will be alerted first and one in the utility room or furnace/water heater area.
One of the most convenient CO detectors is built into a clock radio for a bedroom. When CO is detected, a loud alarm beeps four times followed by a voice message to leave the room. This repeats every six seconds.
There also is a red LED warning display that flashes to alert the hearing impaired.
Electronic CO detectors are effective and can also store the history of the CO gas levels in memory. If the alarm sounds, the fire department can access the recent CO concentration history in your home to help diagnose the source and determine the length of your exposure to the deadly gas.
Two-stage CO detectors provide a warning signal at low CO concentrations and the full alarm at dangerous levels. A flashing light or audible tone alerts you to a possible CO problem before the level gets too high.
Some electronic CO detectors allow you to use your TV remote control to start a self-diagnostic test. Use it regularly to make sure the detector is functioning properly.
Removing mirrors
Q. I had installed mirrors with construction adhesive on some walls to increase the brightness in a room and make it look larger. I want to remove the mirrors now. What is the best method to remove them?
A. Installing mirrors will increase brightness in a room without adding more lamps. Glass mirrors can be dangerous to try to remove, so I always recommend having a professional glass/mirror contractor remove them.
If you must try it yourself, be very careful. Wear heavy clothing, thick leather gloves, workman's boots and eye protection. Keep any children away. Warming the mirror with an electric hair dryer can sometimes soften the adhesive.
XWrite for Update Bulletin No. 503 which gives a buyer's guide of eight CO detector/alarms and tablet manufacturers (32 models) listing number of stages, alarm type, warranties, features and CO exposure warning symptoms. Please send $3 and a business-size SASE to James Dulley, The Vindicator, 6906 Royalgreen Drive, Cincinnati, Ohio 45244. For an instant download, visit James Dulley online at www.dulley.com.